How to Fix the Rabbit Corkscrew by Yourself

Those that have a rabbit corkscrew in their homes, will see that in time, it starts acting strangely and instead of rotating the cork upwards it will do the opposite. This basically means that the cork will not pop out anymore, and instead it will be pushed in or broken inside the bottle. If you have noticed this situation, then you have to know how to fix the rabbit corkscrew, and the next steps will help you with this.

Step 1: You have to see how the rabbit corkscrew works when placed on top of the wine bottle. Its two side pins will clamp on the sides of the bottle, and then have to be in the right position, below the handles, so that the screw will not be allowed to rotate in the wrong direction.

Step 2: Once the two pins have been identified, you should focus on the movement of the corkscrew's handles. When you push them, they should securely place the pins on each side on the bottle. If they are not, then the inside bushing that helps them to do that might be deteriorated. This bushing is a small plastic circle that is placed on the inside.

Step 3: The bushing of the rabbit corkscrew should be covered, depending on the model, benefit the pins. You have to take the covers off and then evaluate the state in which the bushings are. In most cases, they travel to the outside of their enclosing area, which makes it difficult for the screw to pull the cork out.

Step 4: If this is the case, and the bushings are placed upper, then all you need to do is to push them back into their original position and the rabbit corkscrew should be fixed. To do this, use any type of tool that comes in handy, which can fit into the housing and can be used to push the bushings backwards. Once you manage to do this, using even a regular kitchen knife, the corkscrew is ready for normal usage again.



Source by Stewie Anderson

Leave a Reply